Valcom V-VCU Datasheet download pdf

Issue 6

1 947036

V-VCU

CLOCK CONTROLLER PACKAGE

GENERAL

The Valcom Clock Controller provides 24VDC

power as well as automatic synchronization and

correction to Valcom clocks when used with a

V-DCPI Digital Clock Protocol Interface, a

V-D11025 2.5” Digital Clock, a V-D11040 4.0”

Digital Clock, a V-WMC Wireless Master Clock

Transceiver, a V-GPS GPS Receiver, a VERCA

Remote Card Adapter or a clock output from

another V-CCU.

PACKAGE INCLUDES

1 Valcom V-CCU Clock Controller

1 Valcom 24V Power Supply V-C6124P

1 24V Wiring Harness

1 6-Pin Silver-Satin Cord

1 6-Pin RJ-11 Wiring Block

SPECIFICATIONS

Outputs

Three individual 2 Amp, 24VDC outputs are

provided to power up to 120 Valcom Analog clocks,

36 Valcom 2.5” Digital Clocks or 30 Valcom 4.0”

Digital Clocks.

Inputs

Correction data

24VDC input power

Features

Supports two wire clock operation

Individual current limited 2 Amp outputs

User selectable correction intervals

Data error LED indicators

Power/Data output LED indicators

Dimensions/Weight

2.63”H x 12.36”W x 7.75”D

(6.7cm H x 31.4cm W x 19.7cm D)

7lbs. ( 3.2 kg ) (with power supply)

Power Requirements

The V-CCU requires 24VDC 2 Amps per output

(V-C6124P included).

Environmental

Operating Temperature: -0 to +40° C

Humidity: 0-95% non-precipitating

Wiring Requirements

24AWG UTP, CAT 3/5/5E/6

INSTALLATION

Precautions

Failure to observe the following precautions could

result in damage to the V-CCU.

Make all connections to the V-CCU and

associated equipment with the input power

removed. Check and verify all connections

before applying power.

V-C6124P Mounting Instructions

Locate an area on the wall capable of

supporting the weight of the power supply

(approximately 5 pounds) within six feet of an

AC receptacle.

Using the mounting bracket as a template, mark

the two slotted holes on the mounting surface.

Using the two #8 screws enclosed, mount the

bracket to the mounting surface as shown

(See Figure 1).

Slide the V-C6124P onto the mounting bracket.

V-C6124P Wiring Instruction

Plug the AC cord into the V-C6124P only.

(Do NOT plug into the AC outlet)

Plug the wiring harness packaged with the

V-CCU into the output connector of the

V-C6124P (See Figure 1).

1 2 3 4

Summary of Contents

Page 1 - CLOCK CONTROLLER PACKAGE

Issue 6 1 947036 V-VCU CLOCK CONTROLLER PACKAGE GENERAL The Valcom Clock

Page 2 - V-CCU Wiring

947036 2 V-CCU Mounting Plug the 24V wiring harness from the V-C61

Page 3 - Master/Slave Mode

947036 3 Setup and Programming If using a V-GPS, a V-WMC or a V-D1

Page 4

947036 4 TECHNICAL SUPPORT When trouble is report

Comments to this Manuals

No comments

Valcom V-VCU Datasheet

Browse online or download Datasheet for Wall clocks Valcom V-VCU. Valcom Clock Driver User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Wall clocks Valcom V-VCU